MSU faculty use 3D printers to produce face shields for Meridian medical personnel

A 3D printed face shield is pictured against a black background
Mississippi State University faculty and staff are 3D printing hundreds of face shields for medical professionals on the front lines of the fight against COVID-19. (Photo by Logan Kirkland)

Contact: Philip Allison

A graduate student makes facie shields in McCain Hall
Abdullah Al Mamun, an MSU industrial and systems engineering doctoral student from Bangladesh, works to 3D print face shields in McCain Hall. (Photo by Logan Kirkland)

STARKVILLE, Miss.—With personal protective equipment in short supply nationwide, a team of engineers and researchers at Mississippi State University is turning to an unlikely combination of 3D printers and office supplies to aid medical personnel tackling COVID-19. 

The team, led by faculty from MSU’s Bagley College of Engineering and researchers at the university’s Center for Advanced Vehicular Systems, is producing face shields by combining 3D-printed head bands with transparent plastic sheets and elastic bands generally found at office supply stores. 

The head band for each face shield takes approximately two and a half hours to print. Using 10 different 3D printers, the team is producing approximately 250 shields per week using polylactic acid filament. The first batch was donated this week with over 100 going to both Rush Foundation Hospital and Anderson Regional Medical Center in Meridian, where they are being used by medical professionals caring for patients with coronavirus.

Rush Health Systems nurses hold up signs that read "Thank You MSU Go Dawgs" while wearing face shields made by MSU faculty and staff.
Rush Health System surgical staff show their appreciation to Mississippi State University after receiving their first shipment of 3D face shields produced by MSU faculty from MSU’s Bagley College of Engineering and researchers at the university’s Center for Advanced Vehicular Systems. (Photo submitted)

“We are in complete awe of the outpouring of support and donations we’ve received from residents and community businesses,” said Rush Health Systems Chief Executive Officer Larkin Kennedy. “The donation of these face masks from Mississippi State University helps ensure our front-line staff remains safe while caring for patients.” 

“With PPE in short supply through our normal procurement channels, innovation has become a critical factor in making sure our staff and patients are protected. Many, many thanks to MSU’s faculty and researchers for developing a face shield that can be produced with easily obtainable supplies. Go dogs! Hail State! We are greatly appreciative of this donation which will go a long way in keeping Anderson staff members protected,” said John G. Anderson, President and CEO of Anderson Regional Health System.

Anderson Regional Health System ICU nurses wear face shields made by MSU faculty and staff
Anderson Regional Health System’s ICU nurses Makayla Jenkins, Melissa Wright, Hannah Cain, Cynthia Stewart and Madison Wright model the new face shields MSU faculty produced combining 3D-printed head bands with transparent plastic sheets and elastic bands generally found at office supply stores. (Photo submitted)

Face shields are generally used in conjunction with surgical masks and protect the eyes, nose and mouth from splashes and sprays. The MSU team developed two prototypes before working with Kennedy to determine the best option for the Rush Foundation Hospital medical staff. 

Working on the project are Linkan Bian, who holds the Thomas B. and Terri L. Nusz Professorship in industrial and systems engineering; Steve Elder, professor of agricultural and biological engineering; Wenmeng Tian, assistant professor of industrial and systems engineering; Tyler Hannis, research engineer at CAVS; and Abdullah Al Mamun, an industrial and systems engineering Ph.D. student from Bangladesh. 

Bian said other university employees also have expressed interest in contributing to the project, including faculty and staff from both MSU’s College of Business and Mitchell Memorial Library. 

A 3D printer makes face shield parts
A 3D printer in McCain Hall at Mississippi State produces parts that will be used to make face shields for medical professionals. (Photo by Logan Kirkland)

“This has been a tremendous team effort so far,” Bian said. “We would not be able to move at our current pace without the efforts of Steve, Wenmeng and Tyler. We’ve also been contacted by others on campus who have 3D printing capacity, and they want to know how they can help. It is really encouraging.”  

The project came about thanks in large part to research partnerships developed as part of Mississippi State’s Faculty Research Advisory Committee. When hospitals began to face shortages of personal protective equipment, Bian, a past chair of the group, contacted Carlton Young, professor of healthcare administration at Mississippi State’s Meridian campus and MSU-Meridian’s committee representative, to ask how he could help. Young connected Bian to representatives at area hospitals to launch the project. 

“Dr. Bian reached out to me and said there was a group at Mississippi State that was willing to 3D print face shields for the hospitals in Meridian. They are now producing hundreds of them,” Young said. “Their expertise, public spirit and passion truly embody the heart of Mississippi State and our mission to serve the people of Mississippi.” 

The Bagley College of Engineering is online at  and can be found on  Facebook,  Twitter,  Instagram and  YouTube at @msuengineering. For more on CAVS, visit or find them on social media at @cavs_msstate.  

Mississippi State University is Mississippi’s leading university, available online at